Journal article
Transient pressure drops of gas bubbles passing through liquid-filled microchannel Contractions: an experimental study
We present the first transient pressure measurements and high-speed visualization of gas bubbles passing through liquid-filled microchannel contractions. We have studied contractions ranging from 100 to 500 µm in glass tubes of main diameter 2 mm and compared the experimental results with the recent model of quasi-stationary bubble motion by Jensen, Goranović and Bruus (2004 J.
Micromech. Microeng. 14 876) valid for low flow rates. The influence of the wetting angle is studied by coating a tube with a hydrophobic solution. Transient pressure measurements, bubble deformations and the influence of the bubble length on the so-called clogging pressure ΔPc are shown to be in good agreement with the model, both in terms of maximum values and in terms of transient evolution.
Some deviations from the model are also observed and possible reasons for these are investigated, such as (a) contact line pinning, (b) thin liquid film along the bubble modifying capillary pressure and (c) viscous pressure drop in the contraction. Experiments with increasing flow rates show that two regimes govern the pressure transients of the bubbles passing the contractions: a quasi-stationary regime for low capillary number and a viscosity-influenced regime for non-negligible capillary numbers.
We propose a criterion based on a modified capillary number to discriminate between these two regimes.
Language: | English |
---|---|
Year: | 2006 |
Pages: | 143-149 |
ISSN: | 13616439 and 09601317 |
Types: | Journal article |
DOI: | 10.1088/0960-1317/16/1/019 |
ORCIDs: | Bruus, Henrik |