Journal article
Camber Evolution and Stress Development of Porous Ceramic Bilayers During Co-Firing
Department of Energy Conversion and Storage, Technical University of Denmark1
Ceramic Engineering & Science, Department of Energy Conversion and Storage, Technical University of Denmark2
Mixed Conductors, Department of Energy Conversion and Storage, Technical University of Denmark3
Electrofunctional materials, Department of Energy Conversion and Storage, Technical University of Denmark4
Camber evolution and stress development during co-firing of asymmetric bilayer laminates, consisting of porous Ce0.9Gd0.1O1.95 gadolinium-doped cerium oxide (CGO) and La0.85Sr0.15MnO3 lanthanum strontium manganate (LSM)-CGO were investigated. Individual layer shrinkage was measured by optical dilatometer, and the uniaxial viscosities were determined as a function of layer density using a vertical sintering approach.
The camber evolution in the bilayer laminates was recorded in situ during co-firing and it was found to correspond well with the one predicted by the theoretical model. The estimated sintering mismatch stress in co-fired CGO-LSM/CGO bilayer laminates was significantly lower than general sintering stresses expected for free sintering conditions.
As a result, no co-firing defects were observed in the bilayer laminates, illustrating an acceptable sintering compatibility of the ceramic layers.
Language: | English |
---|---|
Year: | 2013 |
Pages: | 972-978 |
ISSN: | 15512916 and 00027820 |
Types: | Journal article |
DOI: | 10.1111/jace.12113 |
ORCIDs: | Esposito, Vincenzo , Kaiser, Andreas , Ramousse, Severine and Pryds, Nini |