About

Log in?

DTU users get better search results including licensed content and discounts on order fees.

Anyone can log in and get personalized features such as favorites, tags and feeds.

Log in as DTU user Log in as non-DTU user No thanks

DTU Findit

Conference paper

Effective Switching of Microwaves by Simple Water-Based Metasurfaces

In Proceedings of 2018 Ieee International Symposium on Antennas and Propagation and Usnc-ursi Radio Science Meeting — 2018
From

Electromagnetic Systems, Department of Electrical Engineering, Technical University of Denmark1

Department of Electrical Engineering, Technical University of Denmark2

Metamaterials, Department of Photonics Engineering, Technical University of Denmark3

Department of Photonics Engineering, Technical University of Denmark4

Extensive efforts in the field of metamaterials (MMs) and metasurfaces (MSs) have recently enabled remarkable physics and devices capable of addressing several important scientific and technological challenges (N. Zheludev and Y. S. Kivshar, Nat. Mat., 11, 917-924, 2012; I. B. Vendik and O. G. Vendik, Techn.

Phys., 58, 1-24, 2013; C. L. Holloway et al., IEEE Ant. Propagat. Mag., 54, 10-35, 2012; H.-T. Chen, A. J. Taylor, and N. Yu, Rep. Prog. Phys., 076401, 2016). Due to small material lossess, attention was particularly devoted to all-dielectric relatizations of MMs and MSs (S. Jahani and J. Zubin, Nat.

Nanotechn., 11, 23-36, 2016). The profound properties of all-dielectric MMs and MSs are due to high-permittivity inclusions of appropriate shape situated in a low dielectric matrix. At microwave frequencies, usually barium strontium titanate was used to form the required inclusions. This ceramic material is rather costly, hard to form, and has limited dynamic properties.

Massive practical applications require, however, simple and cheap solutions with highly tunable dynamic properties. To this end, pure water was recently proposed for the consideration in MM and MS design due to its low price, abundance, bio-friendly nature and highly tunable properties. Interesting mechanically and/or thermally tunable water-based MS designs were demonstrated (A.

Andryieuski et al., Sci. Rep. 5, 13535, 2015; M. Odit et al., Appl. Phys. Lett. 109, 011901, 2016), and almost perfect waterbased absorbers were reported (Y. J. Yoo et al., Sci. Rep. 5, 14018, 2015; Q. Song et al., Adv. Opt. Mat. 5, 1601103, 2017). While these pioneering research efforts are significant, they mostly utilize inclusions which are not easy to make.

In this work we build upon these initial efforts and present numerical (Comsol Multiphysics) and experimental (rectangular waveguide) results for a variety of microwave MSs based on very simple and easily made “rod-like” water elements in a dielectric Rohacell 51 HF matrix. An example of our results show how one orientation of the MS (vertical inclusions, Fig. 1, top-left) has a low transmittance, T, and thus blocks the incident waves (Fig. 1, middle), while its mechanical rotation by 90o (horizontal inclusions, Fig. 1, bottom-left) enhances the transmission and lowers the reflection, R (Fig. 1, right).

In the presentation, we will also show how this behavior can be enhanced by stacking these MSs in free space, for which effective switching (on and off) of the waves emitted by a nearby dipole antenna is reported. We believe that the proposed water-based MSs may serve as easy-to-use, portable microwave sensors for quick and cheap identification and characterization of biological and chemical particles, and water micro-plastic contaminants.

Language: English
Publisher: IEEE
Year: 2018
Proceedings: 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting
Types: Conference paper
ORCIDs: Arslanagic, Samel , Jacobsen, Rasmus Elkjær and Laurynenka, Andrei

DTU users get better search results including licensed content and discounts on order fees.

Log in as DTU user

Access

Analysis