About

Log in?

DTU users get better search results including licensed content and discounts on order fees.

Anyone can log in and get personalized features such as favorites, tags and feeds.

Log in as DTU user Log in as non-DTU user No thanks

DTU Findit

Conference paper

Performance of velocity vector estimation using an improved dynamic beamforming setup

In Proceedings of Spie 2001, pp. 227-241
From

Department of Electrical Engineering, Technical University of Denmark1

Center for Fast Ultrasound Imaging, Centers, Technical University of Denmark2

Estimation of velocity vectors using transverse spatial modulation has previously been presented. Initially, the velocity estimation was improved using an approximated dynamic beamformer setup instead of a static combined with a new velocity estimation scheme.(1) A new beamformer setup for dynamic control of the acoustic field, based on the Pulsed Plane Wave Decomposition (PPWD), is presented.

The PPWD gives an unambigious relation between a given acoustic field and the time functions needed on an array transducer for transmission. Applying this method for the receive beamformation results in a set-up of the beamformer with different filters for each channel for each estimation depth. The method of the PPWD is illustrated by analytical expressions of the decomposed acoustic field and these results are used for simulation.

Results of velocity estimates using the new setup are given on the basis of simulated and experimental data. The simulation setup is an attempt to approximate the situation present when performing a scanning of the carotid artery with a linear array. Measurement of the flow perpendicular to the emission direction is possible using the approach of transverse spatial modulation.

This is most often the case in a scanning of the carotid artery, where the situation is handled by an angled Doppler setup in the present ultrasound scanners. The modulation period of 2 mm is controlled for a range of 20-40 mm which covers the typical range of the carotid artery. A 6 MHz array on a 128-channel system is simulated.

The flow setup in the simulation is based on a vessel with a parabolic flow profile for a 60 and a 90-degree flow angle. The experimental results are based on the backscattered signal from a sponge mounted in a stepping device. The bias and std. dev. of the velocity estimate are calculated for four different flow angles (50, 60, 75 and 90 degrees).

The velocity vector is calculated using the improved 2-D estimation approach at a range of depths.

Language: English
Year: 2001
Pages: 227-241
Proceedings: SPIE Medical Imaging 2001
Series: Proceedings of Spie - the International Society for Optical Engineering
Journal subtitle: Ultrasonic Imaging and Signal Processing
ISBN: 0819440116 and 9780819440112
ISSN: 1996756x and 0277786x
Types: Conference paper
DOI: 10.1117/12.428199
ORCIDs: Jensen, Jørgen Arendt

DTU users get better search results including licensed content and discounts on order fees.

Log in as DTU user

Access

Analysis