Journal article
Microstructural changes caused by carbonation of cement mortar
Division of Building Materials, Lund Institute of Technology, P.O. Box 118, SE-221 00 Lund, Sweden
The change of specific surface area and pore size distribution due to carbonation of an ordinary Portland cement mortar is investigated. The adsorption of water vapor on noncarbonated and well-carbonated cement mortar is measured in order to evaluate the difference in specific surface area for the two samples using the BET theory.
From the measured desorption the pore size distribution is calculated using the Kelvin formula. A sorption balance is used to measure the sorption characteristics for the two studied sample qualities. In this method dry and saturated air are mixed in desired proportion in a closed system. One of the benefits of the method is that the samples not are exposed to carbon dioxide during testing, i.e., undesired effects caused by carbonation on the sorption can be eliminated.
The specific surface area for a noncarbonated sample was calculated, using the measured adsorption data, to be 8% higher than for the well-carbonated sample. The difference in pore size distributions was more marked than the difference in specific surface area for the two samples. The well-carbonated mortar had about twice as much volume attributed to small pores as the noncarbonated cement mortar.
Language: | English |
---|---|
Year: | 2001 |
Pages: | 925-931 |
ISSN: | 18733948 and 00088846 |
Types: | Journal article |
DOI: | 10.1016/S0008-8846(01)00498-7 |