About

Log in?

DTU users get better search results including licensed content and discounts on order fees.

Anyone can log in and get personalized features such as favorites, tags and feeds.

Log in as DTU user Log in as non-DTU user No thanks

DTU Findit

Conference paper

A novel method for direct localized sound speed measurement using the virtual source paradigm

From

Department of Electrical Engineering, Technical University of Denmark1

Duke University2

Center for Fast Ultrasound Imaging, Centers, Technical University of Denmark3

Accurate sound speed estimates are desirable in a number of fields, particularly adaptive imaging, and tissue and phantom characterization. In an effort to increase the spatial resolution of sound speed estimates, a new method is proposed for direct measurement of sound speed between arbitrary spatial locations.

The method utilizes the sound speed estimator developed by Anderson and Trahey. Their least-squares fit of the received waveform's curvature provides the wave's point of origin. The point of origin and the delay profile calculated from the fit are used to arrive at a spatially registered virtual detector.

Between a pair of registered virtual detectors a spherical wave is propagated. By beamforming the received data the time of flight between the two virtual sources can be calculated. From this information the local sound speed can be estimated. Validation of the estimator used both phantom and simulation results.

The phantom consisted of two wire targets located near the transducer's axis at depths of 17 and 28 mm. Using this phantom the sound speed between the wires was measured for a homogeneous (water) medium and for two inhomogeneous (DB-grade castor oil and water) mediums. The inhomogeneous mediums were arranged as an oil layer, one 6 mm thick and the other 11 mm thick, on top of a water layer.

To complement the phantom studies, sources of error for spatial registration of virtual detectors were simulated. The sources of error presented here are multiple sound speed layers, and signal-to-noise-ratio. Results are shown for 3 different media. The local sound speed estimates had mean relative errors and standard deviations of 0.0991% plusmn0.655% for a homogeneous medium, and -0.0673%plusmn0.279% and -0.0343%plusmn0.119% for inhomogeneous media with an oil layer of 6 mm and 11 mm respectively.

Simulations are shown as well.

Language: English
Publisher: IEEE
Year: 2007
Pages: 232-235
Proceedings: 2007 IEEE Ultrasonics Symposium
Series: I E E E International Ultrasonics Symposium. Proceedings
ISBN: 1424413834 , 1424413842 , 9781424413836 and 9781424413843
ISSN: 15513025 and 10510117
Types: Conference paper
DOI: 10.1109/ULTSYM.2007.69
ORCIDs: Jensen, Jørgen Arendt

DTU users get better search results including licensed content and discounts on order fees.

Log in as DTU user

Access

Analysis