Cellulose as a binding material in graphitic anodes for Li ion batteries: A performance and degradation study

Four types of cellulose, in particular carboxy methyl cellulose (CMC), are tested as potential binding materials in graphitic anodes for lithium ion batteries. It is shown that a minimum content of a cellulose which gives acceptable anode properties (reversible capacity>300 mA h g−1 during the first 10 cycles, irreversible loss<20%) is about 2 wt.%, which is less than in the case of conventional polymeric binders (5–10 wt.%).

Kinetics of insertion–deinsertion and passivation processes seem not to be affected by the presence of cellulose. Explanation for the electrode failure at cellulose contents lower than 1 wt.% is given based on X-ray diffraction and microscopy investigations. Finally, the structure (distribution) of cellulose in the composite anode material is discussed and (indirectly) checked with a series of experiments.

Most results are compared with the corresponding results obtained either with gelatin or conventional polymeric binders or both.