Preamplifier with ultra low frequency cutoff for infrasonic condenser microphone

Measuring infrasonic sound sets high requirements on the instruments used. Typically the measurement chain consists of a microphone and a preamplifier. As the input resistance of the preamplifier forms a high pass filter with the capacitance of the microphone in the picofarad range, measuring ultra low frequencies becomes a challenge.

The electric preamplifier presented in this paper together with a prepolarized condenser microphone form a measurement system. The developed preamplifier connects the microphone signal directly to the input of an operational amplifier with ultra high input impedance. The bias current for the preamplifier further complicates the signal amplification.

A configuration of two diode-connected FETs provide the input bias current. The resulting input impedance of nearly 1 TW yields a total lower limiting -3 dB cutoff frequency of 8 mHz and a dynamic range of 95 dB. Being able to measure down to ultra low frequencies in the infrasonic frequency range will aid actors in the debate on wind turbine noise.

Sonic booms from supersonic flights include frequencies down to 10 mHz and the preamplifier proposed in this paper will aid scientists trying to modify the N-shaped shock wave at high level which prohibits flights in land zones.